Operating System - Tru64 Unix
cancel
Showing results for 
Search instead for 
Did you mean: 

DS15, Not booting.

shashi kanth
Super Advisor

DS15, Not booting.

One of my DS15 box is not booting. When the box is booting, i am getting the bellow error. Any one tell me what could be the problem ?


*** keyboard not plugged in...
1280 Meg of system memory
probing hose 0, PCI
probing PCI-to-ISA bridge, bus 1
probing PCI-to-PCI bridge, hose 0 bus 2
bus 0, slot 9 -- ewa -- DE500-BA Network Controller
bus 0, slot 11 -- ewb -- DE500-BA Network Controller
bus 0, slot 13 -- dqa -- Acer Labs M1543C IDE
bus 0, slot 13 -- dqb -- Acer Labs M1543C IDE
bus 0, slot 14 -- pka -- NCR 53C895
bus 2, slot 4 -- pkb -- NCR 53C895
bus 2, slot 5 -- eia -- DE600-AA
bus 2, slot 6 -- vga -- Permedia - P2V Graphics Controller
bus 0, slot 16 -- pga -- FCA-2354
initializing GCT/FRU at 3ff42000

Error detected by Pchip 0
PERROR = 0070bff6f4680005
Lost Error
PERR
3 REPLIES
Kapil Jha
Honored Contributor

Re: DS15, Not booting.

Its probably a hardware error , because OS has not started to boot as of now.
So place a case with HP to check hardware.

BR,
Kapil
I am in this small bowl, I wane see the real world......
Ivan Ferreira
Honored Contributor

Re: DS15, Not booting.

Over the years, the failing component that caused most critical errors is memory.

Call for hardware support, and ask them to start checking the memory.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
Sri_10
Occasional Advisor

Re: DS15, Not booting.

Alternately (not a real/good solution, but something to try ..): Move the FCA-2354 card from the higher number slot to a lower number slot in the system in order to troubleshoot.

But, hardware call logged to your support vendor is the right thing!

Thanks
Sri