Operating System - Tru64 Unix
cancel
Showing results for 
Search instead for 
Did you mean: 

Does not update firmware when add CPU on AS4100? ?

阎宇钦
Occasional Visitor

Does not update firmware when add CPU on AS4100? ?

CPU is B3006-EB, 600MHZ EV5.6,8MB CACHED
Firmware Version 5.8



Thank you in advance...
6 REPLIES
Mohamed K Ahmed
Trusted Contributor

Re: Does not update firmware when add CPU on AS4100? ?

If I am not mistaken and as I recall, the 4100 you have to add exact same CPU as the ones already there, you can't mix and match CPU's.
Are you sure that this is the case with your system?

HTH
Mohamed
Michael Schulte zur Sur
Honored Contributor

Re: Does not update firmware when add CPU on AS4100? ?

Hi,

I am not sure, I understand your problem. can you rephrase the question?

thanks,

Michael
阎宇钦
Occasional Visitor

Re: Does not update firmware when add CPU on AS4100? ?

I have a AS4100(2Ã 400MHz CPU 2GB Mem) upgrade to 4Ã 600MHz CPU 4GB Mem,2Ã 400MHz CPU was discarded.
OS is Tru64 5.1B Cluster,
but it often hang after update.


Does not update or upgrade firmware when add CPU on AS4100
Mohamed K Ahmed
Trusted Contributor

Re: Does not update firmware when add CPU on AS4100? ?

Can you see the 4 CPU's on the SRM console?
Are all the LEDs on the CPU's lit from the back?
You said that the firmware is 5.8, why are you doing "update" then?

Mohamed
Michael Schulte zur Sur
Honored Contributor

Re: Does not update firmware when add CPU on AS4100? ?

Hi,

the corresponding firmware release for as4100 for 5.1B is V6.0-4

you should update it to that.

greetings,

Michael
Yong_7
Frequent Advisor

Re: Does not update firmware when add CPU on AS4100? ?

Hi Mr. yan,

in your case, it's good idea to keep your firmware and patch level up-to-date first.

after that, if it still hang, you may make a crash dump image and send it to HP for analysis.

Cheers !

YJ