Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
cancel
Showing results for 
Search instead for 
Did you mean: 

Help

Rajarshi Gupta
Frequent Advisor

Help

Hi,

Is there any command in Digital Unix to know any process accessing a particular file system.

Thanks in advance
4 REPLIES
J. Bravo
Respected Contributor

Re: Help

Hello:

This is a forum of HP-UX; for HP-UX there is a command to know the process in a file or file structure:

fuser -cu

and with

fuser -k

you can kill the processes.

Regards;

J. Bravo.
Torsten.
Acclaimed Contributor

Re: Help

Digital Unix?

Try to ask your question here:

http://forums1.itrc.hp.com/service/forums/familyhome.do?familyId=280

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Rob Leadbeater
Honored Contributor

Re: Help

Hi,

It seems a moderator has probably moved your post to the Tru64 forum...

The solution would be the same as on HP-UX however: fuser.

http://h30097.www3.hp.com/docs/base_doc/DOCUMENTATION/V51_HTML/MAN/MAN8/0148____.HTM

Hope this helps,

Regards,

Rob
Vladimir Fabecic
Honored Contributor

Re: Help

Yes, fuser is a solution.
You can also use open source utility lsof.
See:
http://h30097.www3.hp.com/demos/ossc/html/lsof.htm
In vino veritas, in VMS cluster