Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Operating System - Tru64 Unix
cancel
Showing results for 
Search instead for 
Did you mean: 

How to check physical memory from Tru64 Unix

SOLVED
Go to solution
Bobcat_1
Advisor

How to check physical memory from Tru64 Unix

Hardware - DS25 with 4GB Memory on Tru64 Unix v5.1B

Need to check the physical memory layout of the server (eg - whether it is a 512mb or 256mb).
How do we check this via Unix WITHOUT shutting down the server. Is it possible ?

Thanks.
9 REPLIES
roland krahbichler
Occasional Visitor
Solution

Re: How to check physical memory from Tru64 Unix

you can see the DIMM´s with the HP insight manager
Slayer Slayer
Frequent Advisor

Re: How to check physical memory from Tru64 Unix

Hey Bobcat,

Have a look at the binnary.errlog, it tells you the physical memory and available memory. Another approach on V5.x systems is to use the hwmgr command (e.g. hwmgr -show scsi, hwmgr -show comp).


HTP

Regards

Bruno
akshay_2
Occasional Visitor

Re: How to check physical memory from Tru64 Unix

If atall you have a recorded "sys_check" report with you, it may help you out.
Particularly the hwmgr section.

Regards,
Akshay.
Nigel Halliday
Occasional Advisor

Re: How to check physical memory from Tru64 Unix

Try:

grep -i physical /var/adm/messages

Depending on last time system was booted and whether you clean up the messages file.

Nigel
Tanapong Eamsoponkul
Occasional Advisor

Re: How to check physical memory from Tru64 Unix

Try this Command :
vmstat -P |grep "^Total Physical Memory"
Tanapong Eamsoponkul
Occasional Advisor

Re: How to check physical memory from Tru64 Unix

http:/{Servername}:2301
and Click "System Board"
See "Memory Module" Section
Slayer Slayer
Frequent Advisor

Re: How to check physical memory from Tru64 Unix

Hey BobCat,

Please assign some points to those who spent time trying to answer your question.

:-)

Regards

Bruno
Francesco Sarno
Frequent Advisor

Re: How to check physical memory from Tru64 Unix

Hi bobcat,
type as root :'uerf -R|grep -i memory'
There is a raw that tell you the amount of phisical memory on your system.

Bye, F.
Bobcat_1
Advisor

Re: How to check physical memory from Tru64 Unix

The solution has been found.
Thank you all.