Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Operating System - Tru64 Unix
cancel
Showing results for 
Search instead for 
Did you mean: 

How to disable DVD player without phyically disconnect it?

SOLVED
Go to solution
Cheri Wong
Occasional Contributor

How to disable DVD player without phyically disconnect it?

Hello,

The DVD player of my DS15 failed and its LED is blinking. Console message "[700]SCSI event" shown continuously.

Since I never use this DVD player, I want to disconnect it but I can't open the server case. Is there any command that can disable the DVD player? System is running Tru64 5.1a.

The information of the DVD player:

HWID: 100
Device Name: /dev/disk/cdrom1c
Mfg: HL-DT-ST
Model: RW/DVD GCC-4481B
Location: bus-2-targ-0-lun-0
SCSI DEVICEID: 10

Please advice. Thanks in advance!!

Regards,
Cheri
2 REPLIES
Rob Leadbeater
Honored Contributor
Solution

Re: How to disable DVD player without phyically disconnect it?

Hi Cheri,

You could try to delete the device with the following commands, and see if that resolves the problem.

# dsfmgr -R hwid 100
# hwmgr delete component -id 100

...although the error might be being generated by the SCSI bus/controller rather than the device itself.

Hope this helps,

Regards,

Rob
Cheri Wong
Occasional Contributor

Re: How to disable DVD player without phyically disconnect it?

Thanks Rob,

I disabled the DVD player but the messages still display. I think the error is coming from the mother board :-(

Anyway, thanks for your help!!

Regards,
Cheri