Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
Operating System - Tru64 Unix
cancel
Showing results for 
Search instead for 
Did you mean: 

I need to view hba driver version in tru64 4.0 and 5.0

SOLVED
Go to solution

I need to view hba driver version in tru64 4.0 and 5.0

Hi,
I don't know how to view the hba driver version. I tried with emxmgr menu, hwmgr command and i haven't seen this.
I don't have the initialize hba lines in /var/adm/messages file because the system have a long time up.
Thank's in advance.
Jesús Higueras.
3 REPLIES
Rob Leadbeater
Honored Contributor
Solution

Re: I need to view hba driver version in tru64 4.0 and 5.0

Hi,

If you can't get the details from /var/adm/messages then you may have look at your SAN switches.

Have a look at the output of the command nsShow, assuming you're using Brocade based switches...

Hope this helps,

Regards,

Rob

Re: I need to view hba driver version in tru64 4.0 and 5.0

Rob,

I have got to see the driver and firmware version correctly with the nsshow command from de switch.

Thank you for all

Jesús.
DCBrown
Frequent Advisor

Re: I need to view hba driver version in tru64 4.0 and 5.0

If you are just interested in the emx driver version, then a low tech way is:

# strings /vmunix | grep emx | grep driver
emx driver rev 2.25