Monitoring voltages on ES45 with Tru64

[Evert Jan van Ramselaar]

Are there any tools available to monitor the voltage levels on an ES45 from within Tru64 v5.1a?

I know I can use the 'env' command from the RMC prompt, but how can I monitor the values with a shell script?

Tnx,
EJ

[Pieter 't Hart]

you ca try "http://:2301"
to adress the "insight management agent
wich displays a nice web-page with info like below


System Name : tomcat-a
Manually Refreshed @ Monday, 04 August, 2003 12:19:20


Environment

System
Degraded Action: Shut Down
Temperature:

Temperature Sensors
Sensor Location Temperature Threshold
1 System 30 C 55 C


Fans
Index Type Status
1 System Fan OK

[Evert Jan van Ramselaar]

Unfortunately that does not show the voltage information the RMC env commando does:


RMC>env

System Hardware Monitor

Temperature (warnings at 48.0??C, power-off at 53.0??C)
CPU0: 25.0??C0m CPU1: 26.0??C0m CPU2: 23.0??C0m CPU3: 27.0??C0m
Zone0: 23.0??C0m Zone1: 25.0??C0m Zone2: 22.0??C0m
Fan RPM
Fan1: 2205 Fan2: 2149 Fan3: 2265
Fan4: 2096 Fan5: OFF Fan6: 2265
Power Supply(OK, FAIL, OFF, '----' means not present)
PS0 : OK PS1 : OK PS2 : OK
CPU0: OK CPU1: OK CPU2: OK CPU3: OK
CPU CORE voltage
CPU0: +1.640V CPU1: +1.630V CPU2: +1.640V CPU3: +1.640V
CPU IO voltage
CPU0: +1.640V CPU1: +1.630V CPU2: +1.640V CPU3: +1.640V
CPU CACHE voltage
CPU0: +2.468V CPU1: +2.482V CPU2: +2.495V CPU3: +1.783V
Bulk voltage
+3.3V Bulk: +3.315V +5V Bulk: +4.940V +12V Bulk: +12.159V
Vterm: +1.580V Cterm: +1.590V -12V Bulk: -12.411V
+2.5V Bulk: +2.495V +1.5V Bulk: ----

[Evert Jan van Ramselaar]

Just to bump this one now that this forum is a bit more crowded...

Anyone knows a way of monitoring those values from within Tru64?