Operating System - Tru64 Unix
1748195 Members
2730 Online
108759 Solutions
New Discussion юеВ

Re: NRMT0 and NRMT1 Tape Drivers address setup

 
administrador
Advisor

NRMT0 and NRMT1 Tape Drivers address setup

Urgent!!!!Hello, Hello , Please Help me: How can Configure my new Tape drivers as NRMT0 & NRMT1.

I How can I Recreate those files configured before under root/dev/.

Thanks a lot for your quick response!!!
3 REPLIES 3
Steven Schweda
Honored Contributor

Re: NRMT0 and NRMT1 Tape Drivers address setup

Drives or drivers?

What, exactly, would you like to do?

"sizer -v" output?
Rob Leadbeater
Honored Contributor

Re: NRMT0 and NRMT1 Tape Drivers address setup

Hi,

What version of Tru64 are you running ? Probably 4.0 if you're using /dev/nrmt0 however not necessarily...

On V5, then just use dsfmgr -m to change the new tape devices back to the old ones...

Hope this helps,

Regards,

Rob
Vladimir Fabecic
Honored Contributor

Re: NRMT0 and NRMT1 Tape Drivers address setup

And send output of:
# scu show edt
# ls /dev/rmt*
# ls /dev/nrmt*
In vino veritas, in VMS cluster