Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Operating System - Tru64 Unix
cancel
Showing results for 
Search instead for 
Did you mean: 

Operator initiated halt problem On DS15

Ali.nazarof
Occasional Visitor

Operator initiated halt problem On DS15

Dear all
My DS15 alphaserver is halting almost every day with messages like this.

halted CPU 0
halt code = 1
operator initiated halt
pc = fffffe00004cbee8
>>>

If I type "boot" it boot without any problem

Regards,
Ali
2 REPLIES
Kapil Jha
Honored Contributor

Re: Operator initiated halt problem On DS15

raise a hardware case and send binary.errlog file to HP.

BR,
Kapil+
I am in this small bowl, I wane see the real world......
Pieter 't Hart
Honored Contributor

Re: Operator initiated halt problem On DS15

"operator initiated halt" indicates that either the front halt button was pressed
or on the console an halt sequence was pressed.

Do you use a serial console or graphics?

On openvms i think it was ctrl-P or break (F5 on a VT-terminal or VT-emulator), can't recall the tru64 variant, but see if i can find it.

have you connected a modem to the aux port?