Operating System - Tru64 Unix
1753719 Members
5867 Online
108799 Solutions
New Discussion юеВ

Re: Problem during installation Unix Compact Tru64 UNIX V5.1

 
10-10
Frequent Visitor

Problem during installation Unix Compact Tru64 UNIX V5.1

Hello,
I have server DS20E and I want to install tru64 Unix Compaq Tru64 UNIX V5.1.
Recently the server was working fine, but there was a RAM failure and we replaced it with a new one.
I started to boot from CDROM and go ahead with instillation,but the instillation stopped in the middle
and went to prompt console and gives me some errors like the following :-
- device translate: device cannot be translated scsi 1 7 0 0 0 0 0
- cp-save_term exited with hlt_req=1r0= 000000.0000000
- prom_getenv: unable to convert scsi 1 7 0 0 0 0 0
- cdisk_ioctl: xpt_Get_log failed
I don't know that because of the new RAM or some configurations need to be done in order to go ahead in the instillation.
please could you help me.

by

3 REPLIES 3
Cortes Albertino
Trusted Contributor

Re: Problem during installation Unix Compact Tru64 UNIX V5.1

Hello,


Check to see if any *dev* variable is incorrectly set.

>>>show *

Note or dump the most important values if needed.

And try the following and test to boot CD:

>>> set bootdef_dev ""

( >>> set dump_dev "" )


>>> init
>>> boot dkXXXX

Hope it helps,

 

10-10
Frequent Visitor

Re: Problem during installation Unix Compact Tru64 UNIX V5.1

Hello,
I have done whatever you told me about, and the following errors are solved :-
- device translate: device cannot be translated scsi 1 7 0 0 0 0 0
- prom_getenv: unable to convert scsi 1 7 0 0 0 0 0
- cdisk_ioctl: xpt_Get_log failed


after I started to boot from CDROM and go ahead with instillation,the instillation stopped suddenly in the middle
and went to prompt console and gives the following error:-
- cp-save_term exited with hlt_req=1r0= 000000.0000000
The provided error does not give me a chance to dignosse the problem.
how can I get more details about what going on during the installation?

please could you help me.

by

Cortes Albertino
Trusted Contributor

Re: Problem during installation Unix Compact Tru64 UNIX V5.1

Hello,

 

The last only message you reported( i.e. cp-save_term exited with hlt_req) is not enough to have an opinion.

I suppose that some other error messages were logged too like HALT code, panic, Machine check etc....

So the full footprint may help. ( may be a hardware issue  or a compatibility issue )