Operating System - Tru64 Unix
1748169 Members
4126 Online
108758 Solutions
New Discussion юеВ

Re: Problem with fsdmn

 
Rob Leadbeater
Honored Contributor

Re: Problem with fsdmn

Hi,

Have you run the RAID controller configuration utility to see what state it thinks it is in ?

It has been a while since I've used a KZPCC, but I think you launch the utility from the SRM with:

P00>>> run bios pza0

You should find more help here:

http://h18002.www1.hp.com/alphaserver/products/storage/kzpcc.html

Regards,
Rob
Enkli
Occasional Advisor

Re: Problem with fsdmn

Yes I have run the utility and it give for HDD staus Failed and one mirror with status DOWN
(the 2 HDD with status failed)
Enkli
Occasional Advisor

Re: Problem with fsdmn

Update:
1. Updatet firmware to CQ17

2.I removed the KZPCC adapter and pulled out the battery and let it for 5 min. and then plug in.

Now in SMOR before there were 2 failed HDD now one is failed and the other with status "impacted" but RAID still "DEAD"

Anyone has any experience with these situation??
RG
Rob Leadbeater
Honored Contributor

Re: Problem with fsdmn

Sounds to me like you do indeed have multiple drive failures...

I'd start looking for the backup tapes if I were you...

Cheers,
Rob