HPE Community
Operating System - Tru64 Unix
1753479 Members
4762 Online
108794 Solutions
New Discussion

Scsi adapter in ds20e

 
hareesh
Advisor

‎08-13-2004 04:52 AM

‎08-13-2004 04:52 AM

Scsi adapter in ds20e

Hi,
I have got a DS20E server with SymBios adapter 895 scsi adapter, and the internal connector has been connected to the internal hard disks(bay).I just wanted to connect the external scsi to one more BA356 pedatal .But the device is detecting properly from the SRM console but it is giving some error "SCSI0:HTH Intr.on bus 0,SBCL=0x20 SCSI bus was reset" while system booting
Is it possible to connect the devices to the both internal and external scsi connectors at a time.Anticipating a reply soon..

Thanks
KH

0 Kudos
1 REPLY 1
Ralf Puchner
Honored Contributor

‎08-13-2004 05:29 AM

‎08-13-2004 05:29 AM

Re: Scsi adapter in ds20e

if the Symbios 895 is on the supporter option list it should work (check it). But scsi bus reset indicates a cable/termination problem be sure you have set correct termination (SRM is not an indication) and cable length.
Help() { FirstReadManual(urgently); Go_to_it;; }
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.