Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
Operating System - Tru64 Unix
cancel
Showing results for 
Search instead for 
Did you mean: 

TCP/IP Configuration on Tru64 Unix

SOLVED
Go to solution
N/A

TCP/IP Configuration on Tru64 Unix

Hi,

I have just finished installation of Tru64 Unix 5.1b on Alpha 1200 Server. And I have installed all the licenses.

I am facing some problem while configuring TCP/IP services.

I have configured TCP/IP using following command:

ifconfig tu0 16.138.189.78 netmask 255.255.255.0 broadcast 16.138.189.127

After configuration output of ifconfig -a is:

# ifconfig -a
lo0: flags=100c89
inet 127.0.0.1 netmask ff000000 ipmtu 4096

sl0: flags=10

tu0: flags=c63
inet 16.138.189.78 netmask ffffff00 broadcast 16.138.189.127 ipmtu 1500

tun0: flags=80

tun1: flags=80

But the problem is that I am not able to connect to the server from outside the subnet. Means, I am able to connect it through telnet from 189 subnet but not from outside 189.

Could anyone help me to resolve this issue. Did I do anything wrong?

Regards,
-ajaydec
2 REPLIES
Vladimir Fabecic
Honored Contributor
Solution

Re: TCP/IP Configuration on Tru64 Unix

The best way to configure network is sysman.
So do:
# sysman Networking
and set all network parameters.
Did you set default gateway?
In vino veritas, in VMS cluster
N/A

Re: TCP/IP Configuration on Tru64 Unix

Thanks Vladimir,

Problem got solved using sysman Networking... :)
Problem is because I didn't set the default gateway.

Regards,
ajaydec