Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
Operating System - Tru64 Unix
cancel
Showing results for 
Search instead for 
Did you mean: 

TRU64 OS Upgrade from v5.1a to v5.1b ITO cannot startup

Cliff Lim Kok Hwee
Regular Advisor

TRU64 OS Upgrade from v5.1a to v5.1b ITO cannot startup

Hi Forum,

I had just completed an OS upgrade of TRU64 system from v5.1a to v5.1b.

Previously the DCE installed were as follows:

DCEMAN420 installed DCE Command Reference Manual Pages V4.2
DCERTS420 installed DCE Runtime Services V4.2
DCESEC420 installed DCE Security Server V4.2

It was uninstalled and installed with the following new version:

DCEMAN431 installed DCE Command Reference Manual Pages V4.3.1
DCERTS431 installed DCE Runtime Services V4.3.1
DCESEC431 installed DCE Security Server V4.3.1

Currently, the dce is running as follows:

root 26186 1 0.0 17:53:36 ?? 0:04.34 /opt/dcelocal/bin/dced -b -s

But I tried to startup my ITO but it is reporting the following errors:-
/usr/opt/OV/bin/OpC/opcagt -start
Error opcctla (Control Agent)(25546) : Initialize of the ITO Control Agent failed. (OpC30-1036)
Can't register manager: Interface's stub/runtime version is unknown (dce / rpc). (OpC20-114)
Can't register manager: Interface's stub/runtime version is unknown (dce / rpc). (OpC20-114)
Stopping all ITO Agent processes... (OpC30-1192)

Query: How do I check whether rpcd is running? Could it be the cause of the problem?

Query: Other then rpcd did I miss out any service that is needed for ITO to startup proper?

Thanks for any prompt reply! Cliff

1 REPLY
Ralf Puchner
Honored Contributor

Re: TRU64 OS Upgrade from v5.1a to v5.1b ITO cannot startup

Please open a call for DCE at Entegrity which is vendor for that product. DCE is not directly supported by HP.
Help() { FirstReadManual(urgently); Go_to_it;; }