Operating System - Tru64 Unix
cancel
Showing results for 
Search instead for 
Did you mean: 

TRU64 default gateway permanent definition

 
SOLVED
Go to solution

TRU64 default gateway permanent definition

Help Help Help Help...........

How can I Update the Server Default Gateway, because when I change It in Routing Tables this update is only temporarily & When the Serve is shut down, then my changes are not there!!!!!

Thanks, Thanks, Thanks...........
James
2 REPLIES 2
Steven Schweda
Honored Contributor
Solution

Re: TRU64 default gateway permanent definition

As explained by "man routes",
"/sbin/init.d/route" uses "/etc/routes"
during system start-up.

Around here:

urtx# cat /etc/routes
default 10.0.0.1
urtx#
Highlighted
Reshma Malusare
Trusted Contributor

Re: TRU64 default gateway permanent definition

Hello James,

First of all
route - manually manipulate the routing tables. These tables are normally maintained by the system routing daemon,
such as in.routed and in.ripngd.

Syntax:
1>route [-fnvq ] add | delete [modifiers] destination gateway [ args ]

2>route[-fnvq ] change | get [modifiers] destination gateway [args]

-f --> Flush the routing tables of all gateway entries.
-n --> Prevent attempts to print host and network names symbolically when reporting actions.
-v --> (Verbose) Print additional details.
-q --> Suppress all output.

#route [ -fnvq ] change | get [ -net | -host ] destination gateway [args]

where destination is the destination host or network, and gateway is the next-hop intermediary through which packets should be routed.
change --> Change aspects of a route (such as its gateway).


Also see man pages of route for further information.

Thanks & Regards
Reshma Malusare