Operating System - Tru64 Unix
1753783 Members
6810 Online
108799 Solutions
New Discussion

Re: Tru64unix:ES40 server restarting automatically

 
Vikash_2
New Member

Re: Tru64unix:ES40 server restarting automatically

Did you tried sys_check with esclate option .Long time back I also landed up in the same situation where I had to replace few Memory bank .
HP support is going to suggest that :)-
Regards
Vikash
Bernard-Granger
New Member

Re: Tru64unix:ES40 server restarting automatically

Hello,

I think it's a memory problem :
Full Description:
A CPU0 uncorrectable double-bit memory fill load event at address
x0588E3240 on an indeterminate data bit has been diagnosed. This System
event may require qualified service to one or more probable field
replaceable unit(s) listed below.


FRU List:
Probability: High
Manufacturer: Compaq
Device Type: Memory DIMM
Physical Location: Slot Array 0 Set 0 MMB0-J1 or MMB0-J2 or MMB1-J1 or MMB1-J2
FRU Part Number: Unavailable
FRU Serial Number: Unavailable
FRU Firmware Rev: Unavailable

You have to upgrade the alphaserver firmware (6.1 mini) and be sure than memory_test parameter is set to full (from SRM >>> set memory_test full). I can't locate the bad DIMM between (Slot Array 0 Set 0 MMB0-J1 or MMB0-J2 or MMB1-J1 or MMB1-J2)
regards,