Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
Operating System - Tru64 Unix
cancel
Showing results for 
Search instead for 
Did you mean: 

checkin problem with (HBA) LP10000 and tru64 5.1b

Deepak kumar_3
Frequent Advisor

checkin problem with (HBA) LP10000 and tru64 5.1b

Hi,

I have tru64 5.1b OS on APPHA ES40 up and runing. But I am not seeing any HBA (KGPSA or LP10000) entry in /var/adm/messages file. Due to this hwmgr -show scsi is not showing any storage device which i have presented to this host.

NOTE : i can see these storage device on P00>> console prompt.I have 4 (LP10000)HBA's

Any idea how to make this HBA checkin by OS.

Regards
Deepak
4 REPLIES
Ivan Ferreira
Honored Contributor

Re: checkin problem with (HBA) LP10000 and tru64 5.1b

Try booting genvmunix and compile the kernel:
>>> boot -fl i

#genvmunix

bcheckrc
lmf reset

doconfig

copy the new kernel to /

Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
Mark Poeschl_2
Honored Contributor

Re: checkin problem with (HBA) LP10000 and tru64 5.1b

What is your console firmware rev? That's a very late model HBA and you probably need the latest and greated console firmware.
Deepak kumar_3
Frequent Advisor

Re: checkin problem with (HBA) LP10000 and tru64 5.1b

hi Ivan,

How to copy new kernel to /

regards
Deepak
Deepak kumar_3
Frequent Advisor

Re: checkin problem with (HBA) LP10000 and tru64 5.1b

Hi Ivan,

Thanks a lot! gmvmunix worked.

Regards
Deepak