Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
Operating System - Tru64 Unix
cancel
Showing results for 
Search instead for 
Did you mean: 

lsm:vold:Warning:Plex swapvol-02 for swap volume is stale or unusable

mac2010
Occasional Visitor

lsm:vold:Warning:Plex swapvol-02 for swap volume is stale or unusable


help !!!

lsm:vold:Warning:Plex swapvol-02 for swap volume is stale or unusable
init:single-user mode

system cannot come into normal mode,help!help!
1 REPLY
mac2010
Occasional Visitor

Re: lsm:vold:Warning:Plex swapvol-02 for swap volume is stale or unusable


error messageï¼

P00>>>boot dkb0
(boot dkb0.0.0.2.1 -flags 0)
block 0 of dkb0.0.0.2.1 is a valid boot block
reading 16 blocks from dkb0.0.0.2.1
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 2000
initializing HWRPB at 2000
initializing page table at 3fd7e000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code

Digital UNIX boot - Mon Apr 12 12:39:50 EDT 1999

Loading vmunix ...
Loading at 0xfffffc0000230000
Current PAL Revision <0x4006500010154>
Switching to OSF PALcode Succeeded
New PAL Revision <0x400650002014f>

Sizes:
text = 4843792
data = 889808
bss = 1330816
Starting at 0xfffffc0000569170

Loading vmunix symbol table ... [1337336 bytes]
Alpha boot: available memory from 0x1cd0000 to 0x3fd7c000
Digital UNIX V4.0F (Rev. 1229); Thu Nov 18 13:32:44 CST 1999
physical memory = 1024.00 megabytes.
available memory = 992.68 megabytes.
using 3914 buffers containing 30.57 megabytes of memory
Firmware revision: 5.8-43
PALcode: Digital UNIX version 1.79-101
Compaq AlphaServer ES40
pci1 at nexus
isp0 at pci1 slot 1
isp0: QLOGIC ISP1040B/V2
isp0: Firmware revision 5.57 (loaded by console)
isp0: Fast RAM timing enabled.
scsi0 at isp0 slot 0
tz6 at scsi0 target 6 lun 0 (LID=0) (DEC TLZ10 (C) DEC 04a8)
isp1 at pci1 slot 2
isp1: QLOGIC ISP1040B/V2
isp1: Firmware revision 5.57 (loaded by console)
isp1: Fast RAM timing enabled.
scsi1 at isp1 slot 0
rz8 at scsi1 target 0 lun 0 (LID=1) (COMPAQ BB00911CA0 3B05) (Wide16)
rz9 at scsi1 target 1 lun 0 (LID=2) (COMPAQ BB00912301 B016) (Wide16)
tz10 at scsi1 target 2 lun 0 (LID=3) (DEC TLZ10 (C) DEC 02ab)
isp2 at pci1 slot 3
isp2: QLOGIC ISP1040B/V2 - Differential Mode
isp2: Firmware revision 5.57 (loaded by console)
isp2: Fast RAM timing enabled.
scsi2 at isp2 slot 0
tu0: DECchip 21143: Revision: 3.0
tu0: auto negotiation capable device
tu0 at pci1 slot 5
tu0: DEC TULIP (10/100) Ethernet Interface, hardware address: 08-00-2B-C4-7F-74
tu0: auto negotiation off: selecting 100BaseTX (UTP) port: half duplex
tu1: DECchip 21143: Revision: 3.0
tu1: auto negotiation capable device
tu1 at pci1 slot 6
tu1: DEC TULIP (10/100) Ethernet Interface, hardware address: 08-00-2B-C3-11-05
tu1: auto negotiation off: selecting 100BaseTX (UTP) port: half duplex
gpc0 at isa0
pci0 at nexus
comet0 at pci0 slot 1
ace0 at isa0
ace1 at isa0
lp0 at isa0
fdi0 at isa0
fd0 at fdi0 unit 0
ata0 at pci0 slot 15
ata0: ACER M1543C
scsi3 at ata0 slot 0
rz24 at scsi3 target 0 lun 0 (LID=4) (COMPAQ CDR-8435 0013)
scsi4 at ata0 slot 1
usb0 at pci0 slot 19
Created FRU table binary error log packet
lvm0: configured.
lvm1: configured.
kernel console: ace0
dli: configured
ATM Subsystem configured with 1 restart threads
ATM IFMP: configured
clubase: configured
ATMUNI: configured
ATMSIG: 3.x (module=uni3x) configured
ILMI: 3.x (module=ilmi) configured
ATM IP: configured
ATM LANE: configured.
ADVFS: using 9321 buffers containing 72.82 megabytes of memory
lsm:vold: Warning: Plex swapvol-02 for swap volume is stale or unusable

INIT: SINGLE-USER MODE
#
#


admin help me !!!!!