Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
Operating System - Tru64 Unix
cancel
Showing results for 
Search instead for 
Did you mean: 

result of the mnt -f on tape1_d1

esteoule
Occasional Contributor

result of the mnt -f on tape1_d1

mt -f /dev/tape/tape1_d1 status

DEVIOGET ELEMENT CONTENTS
---------------- --------
category DEV_TAPE
bus DEV_SCSI
interface SCSI
device SuperDLT
adpt_num 0
nexus_num 3
bus_num 0
ctlr_num 8
slave_num 13
dev_name tz
unit_num 13
soft_count 0
hard_count 1
stat 0x1
DEV_BOM
category_stat 0x0
DEV_131000_BPI

DEVGETINFO ELEMENT CONTENTS
------------------ --------
media_status 0x10001
BOM POS_VALID
unit_status 0x121
Ready 2_FM_Close Rewind Buffered
record_size 0
density (current) 131000 BPI
density (on write) 0 BPI
Filemark Cnt 0
Record Cnt 0
Class 2 - RDAT

MTIOCGET ELEMENT CONTENTS
---------------- --------
mt_type MT_ISSCSI
mt_dsreg 0x1
DEV_BOM
mt_erreg 0x0 No error or no sense info.
mt_resid 0
mt_fileno 0
mt_blkno 0
DEV_EEI_STATUS
version 0x2
status 0x0 No EEI status available
flags 0x1000000
CAM_DATA
cam_status 0x0 No CAM status available
scsi_status 0x0 SCSI_STAT_GOOD
scsi_sense_data not valid
1 REPLY
Mohamed K Ahmed
Trusted Contributor

Re: result of the mnt -f on tape1_d1

Can you please specify the problem you are facing?

Mohamed