show config

[Keith W.]

I'm using a DS15 and am accessing it via the serial port. I'm not booting the OS and would like to know if there's a method to get the MAC address without having to view the entire "show config" output?

[Johan Brusche · Accepted solution]

>>> show device | grep EW

The DS15 has 2 onboard 10/100Mbit of type EW
(EWA0,EWB0)

Johan.

[Keith W.]

My bad, sorry for such a lame thread I had no idea that grep was available while at this low of a level and not even booted. Thanks much, this got me what I needed.

[Michael Schulte zur Sur]

Hi,

show ew* would have done it too!

greetings,

Michael