Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
Operating System - Tru64 Unix
cancel
Showing results for 
Search instead for 
Did you mean: 

strang bus number output of uerf command

mahmoud_4
Occasional Contributor

strang bus number output of uerf command

Hi admins,
related to trucluster 5.1A,pk#1,two ES40,F.C cluster interconnect,HSG80 controller V8.7,two HBA controller on each node,
every day I issue #uerf -R command
----- EVENT INFORMATION -----

EVENT CLASS ERROR EVENT
OS EVENT TYPE 199. CAM SCSI
SEQUENCE NUMBER 3860.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Sun Jun 26 00:40:01 2005
OCCURRED ON SYSTEM jupa
SYSTEM ID x000D0022
SYSTYPE x00000000
PROCESSOR COUNT 4.
PROCESSOR WHO LOGGED x00000000

----- UNIT INFORMATION -----

CLASS x0000 DISK
SUBSYSTEM x0000 DISK
BUS # xFFFFFFFE
my question is about why bus number is xFFFFFFFE,
many thanks
2 REPLIES
Han Pilmeyer
Esteemed Contributor

Re: strang bus number output of uerf command

You should NOT be using "uerf" on relatively recent systems. For that class of system, the minimum would be to use DECevent or (better) Compaq Analyze (CA). The bit-to-text translation for "uerf" hasn't been updated in years. Best thing would be to look at WEBES which includes the System Event Analyzer (SEA, the CA replacement).

Look for WEBES at: http://h18000.www1.hp.com/support/svctools/

When you analyze the error log with SEA and still see strange data, please show us an error log entry with full details.
Devesh Pant_1
Esteemed Contributor

Re: strang bus number output of uerf command

webes is the way to go
thanks
DP