Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
Operating System - Tru64 Unix
cancel
Showing results for 
Search instead for 
Did you mean: 

tru64 V4.0g doconfig fail

edi_4
Advisor

tru64 V4.0g doconfig fail

Hi! Because of new device KZPCC installation I need ti rebuild the kernel. During

doconfig -c HOSTNAME

I get:
rm -f vmunix vmunix.sys
loading vmunix.sys
ld:
Error: Undefined:
mount_throttle_lockinfo
cam_ata_configure
cam_ata_attributes
mount_throttle_lock
mount_throttle_lock_inited
*** Exit 1 (ignored)
chmod 755 a.out
chmod: a.out: No such file or directory
*** Exit 4
Stop.


2 REPLIES
Hein van den Heuvel
Honored Contributor

Re: tru64 V4.0g doconfig fail

May we assume you did do the reboot with genvmunix before the doconfig?


I just checked the docs, and that interface is supposed to be supported:

http://h30097.www3.hp.com/docs/base_doc/DOCUMENTATION/V40G_HTML/AQTLMGTE/TITLE.HTM

1.1 Support for New Hardware
The following new hardware is supported in this release of the operating system:
:
DS-KZPCC-CC: 3-Channel, 64-bit PCI to Ultra2 LVD Backplane RAID controller with 64 MB cache


dunno,
Hein.
edi_4
Advisor

Re: tru64 V4.0g doconfig fail

Hi Hein - I did reboot with genvmunix, it seems to be linking problem... tonight I am going to install new 4.0g. There seems to be some coruupted or deleted files on the system....who knows
Thank you.