BL460c G7 ESXi Installation

[Cruchot]

Hello,

I have a big installation problem with new BL460c G7 on a client site.
I am unable to install ESXi. It stops very early with "Unable to load module /usr/lib/vmware/vmkmod/vmfs3 ..."

It seems to be a problem with the NICs or the Smart not recognized. Do you have an idea ?

Thanks

[Michal Kapalka (mikap) · Accepted solution]

hi,

check the knowledge base on the Vmware, they have a solution for you Blade.

http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1029958

assing points if you are satisfied.

mikap

[Michal Kapalka (mikap)]

hi,

more could be fond also on this HP blog :

http://h30507.www3.hp.com/t5/Eye-on-Blades-Blog-Trends-in/HP-images-of-ESX-and-ESXi-for-G7-server-blades/ba-p/82746

mikap

[Cruchot]

Hi all,

Once more, this is a perfect answer. I solved my problem
Thanks a lot

[Jeff Forde]

Ok I am running into this same issue and have tried the ESXi File from the blog site. Can you describe what you did to get it to work!?
Thanks

[Jan Soska]

hello,
use hp vmware image from https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=HPVM06 .

it includes all needed drivers for flex network etc.

it wokrs smoothly, tested on couple bl465cG7's

Jan

[Jeff Forde]

That is the installation media I've been trying to use but the installation is not successful. I'm using 4.1_Dec_2010_ESXi_HD_USB_SD_Image_Installer_583772_009.iso, and am trying to install by mouniting that iso to the Blade over ILO3. How did you preform the installation?

Thanks
~J

[Greg_IT]

I have the same issue that the install fails after 3% or so. Did a resolution for this issue get resolved?