DL380 G10 / VMWARE ESXI 6.7 AVRIL 2018 HPE

[FAPM]

Hi,

Following the installation of the latest version "April 2018" of the vmware HPE image, I have errors on the sensors...

Do you have the problem too?

DL380 G10, SPP 2018.06.0  VMWARE ESXI 6.7 AVRIL 2018 HPE ...

BEst regards,

[FAPM]

FAN : The fix will be available as part of ESXi 6.7 U1 ............ 

LOM Card ?

[Jags_21]

Hi,

Its not clear what type of errors you are getting, I assume you are pointing to LOM, which is either disabled, not present or getting some other errors on the server is not clear again.

Please have a look at this KB.

https://kb.vmware.com/s/article/53134

Hope this helps, for update release feel free to reach out the support team.

Regards,

[upAndup448768]

Hi indus -- so are you recommending that FAPM downgrades their iLO 5 FW from 1.30 to 1.20 to resolve the problem?