Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
Operating System - VMware
cancel
Showing results for 
Search instead for 
Did you mean: 

Disabled NIC agents on HP System Management Homepage

Omid Boloori
Occasional Visitor

Disabled NIC agents on HP System Management Homepage

I have 5 ESX 4.0 servers running in a cluster. Each server has a total of 6 Ethernet NICs but I'm only using 4 NICs. Because of this, the local System Management Homepage is reporting an alarm on those 2 interfaces and it is consequently showing up in the HP Systems Insight Manager server.

Is there a way to disable the agent for these two specific NICs? I know that on a Windows Server this can be done from the HP Management Control Panel, but I can't seem to find a way to do it on and ESX host.
1 REPLY
Highlighted
Uwe Zessin
Honored Contributor

Re: Disabled NIC agents on HP System Management Homepage

I use simple loop-back connectors to keep the agent happy. By simple I mean they are not fully wired so the port negotiates to 100 MegaBit/sec only which helps me to see which is in production and which is not.
.