Operating System - VMware
1752806 Members
5811 Online
108789 Solutions
New Discussion юеВ

Re: ESXi 4.1 Bundle Installation

 
vmcreator
Occasional Advisor

ESXi 4.1 Bundle Installation

I have a HP DL380 G7 with ESXi 4.1 Update 1 installed on an onboard SDHC Flash Media, leaving local disks for VMFS3 etc.

When I try to install any HP ESXi 4.1 bundle with vihostupdate.pl etc, i get an error :-

I/O error <17> on file var/tmp ........

Anybody have a solution ?
2 REPLIES 2
Jags_21
HPE Pro

Re: ESXi 4.1 Bundle Installation

Hi

As per the command mentioned I believe you are trying to upgrade the host not installing.

I am sure this command cannot be used for fresh installation.

If it is upgrade check if there is an symbolic link issue for var folder or check if scratch folder exists on datastore.

regards,
Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise.
I work for HPE

Accept or Kudo

vmcreator
Occasional Advisor

Re: ESXi 4.1 Bundle Installation

Hi pjagadish

Yes the symbolic link insertion at root to /var/tmp was the solution. The vihostupdate apply then worked flawlessly.

Best Regards

vmcreator