Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
cancel
Showing results for 
Search instead for 
Did you mean: 

ESXi 4 LUN's

ESXi 4 LUN's

I have a DL360 G5 with a p800 controller. That is attached to an MSA2000 drive enclosure populated with 25 - 146GB drives. I partitioned the MSA2000 into 3 logical drives in addition to the logical drive in the GL360 giving me 4 logical drives. When configuring Storage in ESXi4 I noticed all the logical drives were LUN 0. I need to have other LUN ID's in VMWare because of the 2TB limit. How do I get the other logical drives to have other LUN ID numbers.
1 REPLY
Uwe Zessin
Honored Contributor

Re: ESXi 4 LUN's

I've asked for some information in your other thread:
http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1375562

> How do I get the other logical drives to have other LUN ID numbers.

Maybe the SAS adapter creates different targets for each volume... Don't know - have not worked with one yet.

ESX 4 is still limited to 2 TeraByte LUNs - independend from the LUN address.
.