Operating System - VMware
cancel
Showing results for 
Search instead for 
Did you mean: 

No Alert Sent When Disk Failed

SOLVED
Go to solution
HTH_1
Occasional Advisor

No Alert Sent When Disk Failed

I was able to install HP agents on an ESX 3.5 server running on a DL380 G3. From the HP System Management Page I can send an SNMP trap to an HIM server; I can also send trap test with this CLI:
vicfg-snmp.pl --server --username --password --test. So SNMP is working. However I cannot find where to set notifications for hw failure. In a windows system I select Physical in Settings>SNMP Webagent>SNMP & Agent Settings>SNMP Agent Configuration as in the attached then I get alerts when a disk fails. In ESX where can I change the setting for this? Thanks.
2 REPLIES
Maxim Revutskiy
Valued Contributor
Solution

Re: No Alert Sent When Disk Failed

in /etc/snmp/snmpd.conf
trapsink server.address communityname
HTH_1
Occasional Advisor

Re: No Alert Sent When Disk Failed

Thx. It works now.