Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
cancel
Showing results for 
Search instead for 
Did you mean: 

VSphere 4.1

Yasar OZKUL
Occasional Visitor

VSphere 4.1

Hi ;
I have got a DL 380 G7 server having the latest firmware.
This server has NC 375T NIC adapter.There is also two HP AK 344A HBA for SAN connection. One problem is that there is red line on the esx screen that it says cpu2 290 out of interrupts , I have searched kb and found that my problem is NC 375T and I need driver update for my nics and red line error message will be resolved next U1 update ,Is that correct ?.Second problem in vmkernel log there is a error line and add itself in every 5 minute vmkernel :0:06:25:02.535 cpu10:4106 <4>hpsa0: Device:C0:T0:L0 Illegal Request.I have searched where it comes this error message ,I found that it is vmhba3 which is dvdrom drive.But there is no cd,dvd or activity in the DVD. How Can I get rid of this message or How Can I fix it ,is this warning or fatal error message. Best Regards Yasar OZKUL
3 REPLIES
Jan Soska
Honored Contributor

Re: VSphere 4.1

Hello,
have you tried update nic driver via vmware driver cd?

http://downloads.vmware.com/d/info/datacenter_downloads/vmware_vsphere_4/4#drivers_tools

Jan
Cvetan Grigorov
Occasional Advisor

Re: VSphere 4.1

Hi
I have DL385 G7 and have the same problem every five minutes there is an illegal request
... hpsa0: Device C0:T0:L0 Illegal request
Uwe Zessin
Honored Contributor

Re: VSphere 4.1

I've looked after the same problem, yesterday.
There is a comment in the VMware communities that, according to HP, this message can be ignored.
.