PCM
cancel
Showing results for 
Search instead for 
Did you mean: 

Tranciever not supported on PCS :(

 
MindaugasS
Occasional Visitor

Tranciever not supported on PCS :(

Hello,

I have a problem.

I bought HP X132 10G SFP+ LC SR Tranciever (J9150A) and it dont work on HP 2530-48G Switch(J9775A).

Error log on swich interface: Trancievert type not % supported on this port.

My swich has 48 LAN ports and 4 optic. All 4 optic ports gets the same error on swich web interface.

On swich and tranciever support list they must support each other.

I'm a new user 4 networking..

may I made a mistake somethere?

5 REPLIES 5
Vince-Whirlwind
Honored Contributor

Re: Tranciever not supported on PCS :(

You are trying to install an 10Gb SFP+ transceiver module into a 1Gb SFP trasnsceiver slot. That will never work.

Vince-Whirlwind
Honored Contributor

Re: Tranciever not supported on PCS :(

The switch you wanted is the: J9855A - HP 2530-48G-2SFP+ Switch

MindaugasS
Occasional Visitor

Re: Tranciever not supported on PCS :(

no, my swich: http://www8.hp.com/lt/lt/products/networking-switches/product-detail.html?oid=5333809#!tab%3Dspecs

 

**bleep**.. :(

in specification writing: 4 fixed Gigabit Ethernet SFP ports

 

it mean 4 port, for each other max 1 Gbs?

Vince-Whirlwind
Honored Contributor

Re: Tranciever not supported on PCS :(

SFP = 1Gb

SFP+ = 10Gb (J9150)

MindaugasS
Occasional Visitor

Re: Tranciever not supported on PCS :(

thak you, now i will now.