BladeSystem Forums have moved here
To make BladeSystem information easier to find, we have moved the BladeSystem forums here, to Servers and Operating Systems.
Showing results for 
Search instead for 
Do you mean 

swa error question

Go to Solution
Super Advisor

swa error question

[ Edited ]

Hello All,
Here is the error i'm getting when i do swa report.Any idea - pls help.
ERROR: Failed to read:
l.gz Message: URL cannot be opened. Connection timed out (errno:238)



p.S. This thread has been moved from HP-UX > System Administration  to HP-UX > patches - HP Forums moderator

Learning ...
Honored Contributor

Re: swa error question

The good news is the version of SWA available at (C.02.11) includes a fix for this problem.

The bad news is that 1/2 of the ITRC catalog servers still do not have the proper certificates set up as we enter an extended HP holiday. This may cause some (50% oddly enough) catalog failures until we fix the server.

Two options when a problem is encountered with the new version.

1. Count to 10 and try again (really)

2. Explicitly bypass the load balancer

This should be considered a temporary fix as the balancer hides these systems for a reason, but the certificates will work with SWA C.02.11 with the addition of the option:

-x catalog_source=

Now to make some phone calls about those certs...
Honored Contributor

Re: swa error question

I believe that the final certificate issues have been resolved. If users of the current revision (C.02.11) see any trouble be sure to let us know!