Planning
cancel
Showing results for 
Search instead for 
Did you mean: 

quorum server test before going into production.

Jannik
Honored Contributor

quorum server test before going into production.

I have created a thorough document about the entire basic test to do before going into production with a cluster setup.
The only thing I do not know how to test is the "Quorum Server".

What tests on the “Quorum Server” is recommended?
3 REPLIES
BPatrick
Trusted Contributor

Re: quorum server test before going into production.

The basic test you need to do is remove the communication between the cluster nodes and check whether all services failover.
(In case of a two node cluster all services should move to one node.) Make sure the cluster is split into exactly two halves and check the behaviour.
Warren_9
Honored Contributor

Re: quorum server test before going into production.

Hi,

kill the qs and it should respawn and form a new lock.

GOOD LUCK!!
Jannik
Honored Contributor

Re: quorum server test before going into production.

This is what i will do:
Kill the qs server / service.
TOC one of the nodes in the cluster (2 node cluster).
And then see that cmcld TOC the remaning server shortly after.

tnx