ProCurve / ProVision-Based
cancel
Showing results for 
Search instead for 
Did you mean: 

2530 (J9779A) Connections

RobClark
Occasional Visitor

2530 (J9779A) Connections

Excuse the ignorance...

 

New to the networking industry and ive been thrown into completing a new installation. I need to connect 2 of the 2530 switches via  MM fiber. Both units are currently connected into the SFP port 27, however i am unable to Tx/Rx anything. I bow to your expertise.

 

Thanks

2 REPLIES
Michael Patmon
Trusted Contributor

Re: 2530 (J9779A) Connections

Hello.  You have link up?  What kind of transceivers? 

 

show interface brief 27

show interface 27

 

Also, if you could attach/paste the configs.

 

 

 

 

Vince-Whirlwind
Honored Contributor

Re: 2530 (J9779A) Connections

Are you getting link lights on the switch LEDs?

 

If not, you may need to put a X in the fiber - separate one end and patch them back in with the Tx / Rx swapped.