5406 : monitor modules with snmp

[jc_paris]

Hi

I recently had a problem with a module of a 5406. Module B was failed

5406# sh modules

 Status and Counters - Module Information

  Chassis: 5412zl J8698A!        Serial Number:  
                              Allow V1 Modules:   Yes

  Management Module: J8726A      Serial Number:  ID040AS0NM   Core Dump: YES

                                                                      Core  Mod
  Slot Module Description                     Serial Number  Status   Dump  Ver
  ---- -------------------------------------- -------------- -------- ----- ---
  A    HP J9538A 8p 10G-GbE SFP+ v2 zl Module SG0507W008     Up       YES   2
  B                                                          Failed   -
  C    HP J9534A 24p Gig-T PoE+ v2 zl Module  SG0427R03V     Up       YES   2
  D    HP J9534A 24p Gig-T PoE+ v2 zl Module  SG0487R09X     Up       YES   2
  E    HP J9534A 24p Gig-T PoE+ v2 zl Module  SG0467R01S     Up       YES   2
  F    HP J9534A 24p Gig-T PoE+ v2 zl Module  SG0467R028     Up       YES   2
  G    HP J9534A 24p Gig-T PoE+ v2 zl Module  SG0457R040     Up       YES   2

After reload module B, all is OK.

But it is possible to monitor status of module with SNMP ? 

With oid .1.3.6.1.4.1.11.2.14.11.1.2.3.1.4, I have description of each module but not status.