ProCurve / ProVision-Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Add redundant management module to 5400R zl2 switch

Dave Harrold
Advisor

Add redundant management module to 5400R zl2 switch

I would like to add a redundant management module to a 5400R zl2 switch.  I have a second module available, but I can't find any information in the manauls on any configuration needed on the switch.

Do I just plug it in and the switch will automatically configure it for standby?  Or are there additional steps that must be performed?

Any details, including documentation references, would be appreciated.

 

1 REPLY
Michael Patmon
Trusted Contributor

Re: Add redundant management module to 5400R zl2 switch

Yeah, just stick it in and it should sync, reboot, and become standby.

Here's some more info.  Looks for the "Chassis Redundancy" section and look for "hotswapping in a management module".

Hope that helps.

 

http://h22208.www2.hpe.com/eginfolib/networking/docs/switches/K-KA-KB/15-18/5998-8160_ssw_mcg/content/index.html