ArubaOS 16.2 OSFP configuration guide

[nick1231]

Can you point me to a config guide for OSFP on HPE switch with ArubaOS 16.2 ?

I looked at all type of admin guide for different switch models, but they only refernce RIP and BGP and I could not find instructions for OSPF configuration.

My other question is, do we need a license to enable the OSPF in 16.2 ?

[parnassus]

You didn't specified your exact Switch model (ArubaOS-Switch software branch YA/YB, RA, WB, WC, K, KA or KB)...but it doesn't matter: look for the HPE ArubaOS-Switch Feature and Commands Index 16.02 guide (latest one published on September 2016), there filter for any "OSPF" related command/feature...you will find that, for any command/feature found, a related manual is available into which that specific command/feature is then described in detail (I think for OSPF, mostly, details can be found on IPv6 and MRG guides).

This is the list of (some) ArubaOS-Switch related documentation types:

• Access Security Guide (ASG)
• Advanced Traffic Management Guide (ATMG)
• Basic Operation Guide (BOG)
• IPv6 Configuration Guide (IPv6)
• Management and Configuration Guide (MCG)
• Multicast and Routing Guide (MRG)

The naming, as you can see, is pretty self explanatory.

AFAIK I don't believe OSPF requires any licensing on supporting Switch models/families (Read the manuals, QuickSpecs and Datasheet for confirmation)...I'm quite sure about that.

[nick1231]

Thank you for your response. It is strange that they have actually put the OSPF IPv4 instructions within the "IPv6
Configuration Guide".