HP 2620 & 2920

[Vijay-K]

Hello All,

I have recently purchased some switches in the 2920 series and also the 2620 series but what I noticed was the fan light comes on after the initial testing is complete. I recall the light only comes on if the fan is not working but its hard to believe all the switches I purchased would have a defective fan. I just wanted to know if this was a new feature that HP released, where the fan light comes on when the fan is not in use or something along those lines. Please let me know, thank you.

[EricAtHP · Accepted solution]

The fan light will be on and green when everything is ok. If it is flashing orange along with the fault light, then you have a problem.

See page 1-8 (pdf page 16) of the Install and Getting Started Guide: 

http://h20565.www2.hpe.com/portal/site/hpsc/template.PAGE/action.process/public/psi/manualsDisplay/?sp4ts.oid=5354494&javax.portlet.action=true&spf_p.tpst=psiContentDisplay&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.prp_psiContentDisplay=wsrp-interactionState%3DdocId%253Demr_na-c03674166%257CdocLocale%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken

[Vijay-K]

Thanks a lot for the information. This wasn't the case for the Procurves that I use to have but regardless I should have read up on that manual. Cheers.