ProCurve / ProVision-Based
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 2620 & 2920

SOLVED
Go to solution
Vijay-K
Occasional Contributor

HP 2620 & 2920

Hello All,

I have recently purchased some switches in the 2920 series and also the 2620 series but what I noticed was the fan light comes on after the initial testing is complete. I recall the light only comes on if the fan is not working but its hard to believe all the switches I purchased would have a defective fan. I just wanted to know if this was a new feature that HP released, where the fan light comes on when the fan is not in use or something along those lines. Please let me know, thank you.

2 REPLIES
EricAtHP
Esteemed Contributor
Solution

Re: HP 2620 & 2920

Vijay-K
Occasional Contributor

Re: HP 2620 & 2920

Thanks a lot for the information. This wasn't the case for the Procurves that I use to have but regardless I should have read up on that manual. Cheers.