Aruba & ProVision-based
1748201 Members
2976 Online
108759 Solutions
New Discussion юеВ

Re: HP 2920-24: Error: DDR Training: RD LAT Region Size Too Small

 
linuxmail
Occasional Contributor

HP 2920-24: Error: DDR Training: RD LAT Region Size Too Small

Hi, I tried to upgrade the firmware from two 2920-24, which are stacked. Both switches rebooted, but the switch which was the commander, hang at boot with: I011: Error: DDR Training: RD LAT Region Size Too Small I didn't test to boot with instantly typing "0", but will try it later. At the moment all lights are up and I don't get the boot menu. I don't find anything at Google. Any suggestions? cu denny

2 REPLIES 2
GuruP
Valued Contributor

Re: HP 2920-24: Error: DDR Training: RD LAT Region Size Too Small

Upgrade from which version to which version? please paste the full output of the error 

linuxmail
Occasional Contributor

Re: HP 2920-24: Error: DDR Training: RD LAT Region Size Too Small

hi,

unfortunately, that is the whole error message. The old firmware was 15.12.00 (the original one) and the new one is 15.18.00.10. You can also look at the screenshot, I've attached in the first post.

I tried to type "0" (zero) instantly, but doesn't help. It seems, that the bootloader itself has a problem.

cu denny