HP 2920 switch won't allow acess of servers to Internet

[Vince-Whirlwind]

Does your ASA have a NAT rule for 10.10.50.0?

[krhoover]

I am sorry, I am not understandinig the question. The virtual servers are 10.10.10.xx and are not in the 10.10.50.xx subnet. I have attached the current running config for the firewall.

[krhoover]

Also, I did a packet trace at the firewall from one of the virtual machines to an outside IP address and the results said the packet was dropped because the return path was not found.

[16again]

Route below is still present in ASA, remove it.

route inside 10.0.0.0 255.0.0.0 ASA 1

[krhoover · Accepted solution]

How do I do that? Is the command " no route inside 10.0.0.0 255.0.0.0 ASA 1" ?

[krhoover]

That worked!! Thank you all so much for the help!!