Aruba & ProVision-based
1748241 Members
3868 Online
108759 Solutions
New Discussion

HP 5412 ZL 2 / RDMA / PFC

 
HP-Schrauber
Frequent Visitor

HP 5412 ZL 2 / RDMA / PFC

Hallo Community,

ich versuche unsere Switch Landschaft auf RDMA vorzubereiten, doch leider finde ich nirgends geeignete Lektüre zum Thema, könnt Ihr mir vielleicht weiter Helfen?

Wir haben 2 x HP 5412 ZL2 Switch im Einsatz, verbunden über 2 x 10 GB VSF Link.

Daran Verbunden sind 3 DL 380 G9 und andere diverse Geräte.
Wir möchten nun auf unseren Servern Storage Spaces direct betreiben und haben dazu folgende Konfiguration auf unsere Host´s ausgebracht.

Konfiguration RDMA:
# Clear previous configurations
Remove-NetQosTrafficClass
Remove-NetQosPolicy -Confirm:$False

# Enable DCB, if it’s not already done through the wizard.
Install-WindowsFeature Data-Center-Bridging

# Disable the DCBx setting:
Set-NetQosDcbxSetting -Willing 0

# Create QoS policies and tag each type of traffic with the relevant priority
New-NetQosPolicy "SMB" -NetDirectPortMatchCondition 445 -PriorityValue8021Action 3
New-NetQosPolicy "DEFAULT" -Default -PriorityValue8021Action 3
New-NetQosPolicy "TCP" -IPProtocolMatchCondition TCP -PriorityValue8021Action 1
New-NetQosPolicy "UDP" -IPProtocolMatchCondition UDP -PriorityValue8021Action 1

# If VLANs are used, mark the egress traffic with the relevant VlanID:
Set-NetAdapterAdvancedProperty -Name <Network Adapter Name> -RegistryKeyword "VlanID" -RegistryValue <ID>

# Enable Priority Flow Control (PFC) on a specific priority. Disable for others
Enable-NetQosFlowControl -Priority 5
Disable-NetQosFlowControl 0,1,2,3,4,6,7

# Enable QoS on the relevant interface (named here: RoCE_1)
Enable-NetAdapterQos -InterfaceAlias "10GBPort1"
Enable-NetAdapterQos -InterfaceAlias "10GBPort2"

Nun fehlt uns der gegenpart auf unsere beteiligten Switche.
Die einer der beteiligten Ports wäre bei uns Port 2/E24

Kann jemand Helfen ?

Gruss
M.Fuhr