HP ProCurve bad flow entries

[gojkog21]

I have a problem on HP ProCurve 6600 with creating flow entries. Switch is connected on Floodlight controller, where I enabled only matching on IP address. Floodlight doesn't use flood action. This is two limitations which should be kept on mind. 

I have to small bandwidth, aroud 90 Mb/s when I have 2 hosts on two different instances (vlan30 and vlan40 on photos) of HP switch, but when I connect HP with other OpenFlow switches, bandwidth is less than 5Mb/s.

You have in attach flow tables of instances where hosts are connected.