ProCurve / ProVision-Based
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Procurve 5412zl V2 firmware 15.15.0006 - question regarding logging and debugging info

jgs240
Occasional Contributor

HP Procurve 5412zl V2 firmware 15.15.0006 - question regarding logging and debugging info

I am troubleshooting a ssh issue with Windows OS's (it does not affect Linux OS) and want to see what the Procurve switch might be logging when the SSH failure occurs.  I have issued the following commands and checked the syslog but found nothing related to the event:

debug security login-attempts

debug security ssh verbose

debug all

show logging -r

show logging -d -r

 

I had previously worked on Cisco equipment, so I am used to be overloaded with debug results if I issued the "debug all" command.  I would appreciate help finding a way to produce similiar results on the Procurves.

2 REPLIES
parnassus
Honored Contributor

Re: HP Procurve 5412zl V2 firmware 15.15.0006 - question regarding logging and debugging info

Maybe it's totally possible that some additional specific logging was added, as an enhancement, starting from a later (more recent) specific Release, such as the K.15.18.0008 (and thus also any newer one) with respect to the one your Switch is currently running.

Event Log (CR_0000189525): Added audit log message to the system logging for the following events:

  • Termination of a secure session
  • Failure to negotiate the cipher suite due to cipher mismatch for SSL and SSH sessions
jgs240
Occasional Contributor

Re: HP Procurve 5412zl V2 firmware 15.15.0006 - question regarding logging and debugging info

That could be the solution, thanks for the tip.  I will need to schedule this change.