ProCurve / ProVision-Based
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Procurve Switch 2530 Can't open web interface

DmitriA
Occasional Contributor

HP Procurve Switch 2530 Can't open web interface

Hi all,

 

For some reason I can't open HP switch web interface. I've just connected it for  the first time to the production  network, it got an IP from DHCP but can't open web interface. Telnet works fine.  Any help?

 

Kind Regards,

 

Dmitri

 

 

P.S. This thread has been moevd from Switches, Hubs, Modems (Legacy ITRC forum) to ProCurve / ProVision-Based. - Hp Forum Moderator

3 REPLIES
dhoenel
Occasional Advisor

Re: HP Procurve Switch 2530 Can't open web interface

Is webmanagement enable???
If not, type this in a telnet session.

conf t
webmanagement
Zuri
Occasional Visitor

Re: HP Procurve Switch 2530 Can't open web interface

Web Management for HTTP is already enabled but still not allowing me to access switch to the graphical interface.

Steve Britt
Respected Contributor

Re: HP Procurve Switch 2530 Can't open web interface

Hi Dmitri,

Check that you're using a supported web browser.  Generally speaking the switch web UI supports only the latest two versions of Chrome, Firefox, Safari (on MacOS), and IE.

Regards,

SVB