J4904A telnet only shows 1 line

[cvo]

Hi

I have a ProCurve J4904A (2848) switch and I just updated the image to the lastest version I.10.101.

Only now when I telnet the session only shows one line.  The console session shows the regular screen history and works ok. 

Telnet session worked ok prior to update.

Console settings is:

console terminal ANSI

The command line looks like this, which it didn't prior even though the config is the same:

tty=ansi HOSTNAME#

Wondering if anyone knows what causes this.

Thanks,
Chris

[cvo · Accepted solution]

I have resolved this - quite simple really. 

I reduced the number of rows shown in Putty to 20.

Thought I would post it incase others have this issue.

Thanks everyone for their input :P

[Sahil_123]

The added entry to the CLI hostname tty=none/ ANSI is an expected behavior.

This command is used by application developers who need output from the switch without the cursor position changing.

The entry tty=none is a reminder that the terminal is now in raw mode with terminal escape sequences removed.

To return to the original prompt follow the below command:

ProCurve Switch(config)# console local-terminal vt100

Regards,

Sahil Raina