ProCurve / ProVision-Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Link 2 ProCurve Switch 2510G-24

SOLVED
Go to solution
thebigboy
Occasional Collector

Link 2 ProCurve Switch 2510G-24

Hi,

I want to link 2 ProCurve Switch 2510G-24 to transform in a 48 port without loosing 1000T network speed.

For now, one switch is the child of other and the child canno't have the same network speed beacause is connected on one port of the parent switch.

Thanks for someone who help me !

 

2 REPLIES
parnassus
Honored Contributor
Solution

Re: Link 2 ProCurve Switch 2510G-24

Each unit belonging to the HP ProCurve 2510 Switches Series can be interconnected defining/using accordignly the Port Trunking feature (Basically Port Trunking - generally deployed using the LACP IEEE 802.3ad - means that you can aggregate up to 8 physical Ports to let them to form a Link Aggregation Group on each unit, then interconnect those created LAGs to realize physically the trunk between units): doing so you will end having both Switches interconnected using multiple aggregated physical links (See manual to learn how to do so correctly) and so you can extend your LAN (sort of) horizontally, keeping in mind that your two Switches, once interconnected that way, AREN'T part of any Switch Stack or Virtual Switch but they continue to act as separate units.

Port Trunking is not the "Management Stacking" (historically called "Stacking" on relevant ProCurve documents) you may used to, where you have a Master Switch that can centrally manage various Slaves ones.

Eventually, instead of using some of your 24 Gigabit Ethernet ports for LAGs, you can use Mini-GBIC equipped with 2, 3 or 4 SFP Transceivers (Optical or Copper) to form the above described LAGs.

Aggregating two or more ports on a LAG will help you with the maximum possible throughput traffic speed achievable between your two units (it depends on type of traffic).

thebigboy
Occasional Collector

Re: Link 2 ProCurve Switch 2510G-24

Thank you so much for your quick answer !

I will create several port trunk with a master/slave switch management.