HPE Community
Aruba & ProVision-based
1753356 Members
5243 Online
108792 Solutions
New Discussion

PVST and RPVST interoperate

 
seoungyeol
New Member

‎03-05-2017 09:18 PM - edited ‎03-05-2017 10:27 PM

‎03-05-2017 09:18 PM - edited ‎03-05-2017 10:27 PM

PVST and RPVST interoperate

i'm testing 7506 MDC & 5406

 

MDC-Admin

vlan 1
#
 stp vlan 1 priority 4096
 stp mode pvst
 stp global enable

<HPE_7506>show stp brie
 VLAN ID  Port                                Role  STP State   Protection
 1        Ten-GigabitEthernet0/0/1            DESI  FORWARDING  NONE
 1        Ten-GigabitEthernet1/0/1            DESI  DISCARDING  NONE
<HPE_7506>

MDC Test#1

vlan 1
#
 stp mode pvst
 stp global enable

<HPE>dis stp brie
 VLAN ID  Port                                Role  STP State   Protection
 1        GigabitEthernet4/0/1                DESI  DISCARDING  NONE
 1        GigabitEthernet4/0/2                DESI  DISCARDING  NONE
 1        Ten-GigabitEthernet2/0/1            ROOT  FORWARDING  NONE

 all discarding port to connected 5406zl2

5406

spanning-tree

spanning-tree mode rapid-pvst

 


  VLAN  Root Mac        Root       Root       Root                 Hello   
  ID    Address         Priority   Path-Cost  Port                 Time(sec)
  ----- --------------- ---------- ---------- -------------------- ---------
  1     784859-e84200   4096       20,000     B1                   2       
  10    1c98ec-d22300   32,768     0          This switch is root  2 

 

-------------------------------------------------------

MDC & test#1 is Device, 5406 connected link discarding

not interopertate pvst & RPVST

what is wrong??

Plz.. help me

 

 

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.