Aruba & ProVision-based
1745904 Members
4216 Online
108723 Solutions
New Discussion

RPS cable for older Procurve switches.

 
tpaul
Occasional Visitor

RPS cable for older Procurve switches.

RPS for older Procurve switch.

I have an older Procurve 2824 switch (J4903A). It has a standard electrical input and also an RPS input. I also have the Procurve 600 (J8168A) redundant power supply, but no RPS cable. What cable P/N do I need to go from the J8168A to J4903A?

I have looked at the documentation. All I can find there is that the RPS 600 comes with the needed cables, but no reference to a part number. My cables have gone missing. 

1 REPLY 1
drk787
HPE Pro

Re: RPS cable for older Procurve switches.

Hi,

This could be one the supported part nummber.

p/n: 5069-5729   --  Redundant Power Supply (RPS) cable assembly - Connects between the ProCurve 600 RPS/EPS unit and the supported switch - Has 14-pin 4.2mm Mini-Fit keyed connectors - Six cables included with the ProCurve 600 RPS/EPS unit

 

Thanks

Raj 

Thank You!
I am an HPE Employee

Accept or Kudo