SNMP fails to untagging the port on VLAN

[Sudhirgps]

Hello all

Switch Info: HP 2530 8-POEP Switch

I am using SNMP  to untagging some specific ports for a VLAN. I am using the OID mentioned for untagging

OID for untagging VLAN port is - 1.3.6.1.2.1.17.7.1.4.3.1.4

You can find the OID here - http://www.oidview.com/mibs/0/Q-BRIDGE-MIB.html

I am trying to assign port no 8 as untagged with VLAN id - 90

Hex value for Port 8 is  = 010000000000000000000000

I am using the following code:

snmp2_set("xyx", "public", "1.3.6.1.2.1.17.7.1.4.3.1.4.90" , "x" , "010000000000000000000000")

 But it fails to untagg the port and gives me following error.

Warning: snmp2_set(): Error in packet at 'iso.3.6.1.2.1.17.7.1.4.3.1.4.90': inconsistentValue (The set value is illegal or unsupported in some way) in D:\xampp\htdocs\workstation\index.php on line 3

Thanks in advance for your valueable suggestions.

Sudhir

P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to ProCurve / ProVision-Based. - Hp forum moderator