Tagging a Dynamic LACP connection? possible without GVRP?

[jabbyjim]

Switch: ProCurve Switch 2650

Greetings everyone, I have been banging my head all day on this one.

I am trying to tag the interswitch link which just happens to be a LAG, but of course it doesn't allow it, which I believe is normal. So what is the secret? I have been reading and the only solution I see so far is to turn on GVRP which I really do not want to do.. is there a way?

ex: 

(show lacp)

10 Active Dyn1 Up Yes Success
11 Active Dyn1 Up Yes Success

ProCurve Switch 2650(vlan-1)# tagged 10
Invalid input: 10

ProCurve Switch 2650(vlan-1)# tagged 11
Invalid input: 11

ProCurve Switch 2650(vlan-1)# tagged Dyn1
Dyn1: Inconsistent value.

now what? 

[Vince-Whirlwind]

Forget using Dyn1.

Create a trunk

trunk 10,11 trk1 trunk

And then

vlan 1 tagged trk1

[jabbyjim]

This is brilliant actually, between two HP's I like this alot better. Thank you

In my situation now, unfortunately , I have to use LACP because its the only way to aggregate to a Juniper. 

so I'm guessing from what I am seeing its not possible? To tag LACP?

[Vince-Whirlwind]

Create a trunk

trunk 10,11 trk1 lacp

And then

vlan 1 tagged trk1